--- title: "Hydrogen Fluoride (HF) Sensors & Limit Values | Aethair" description: "Hydrogen fluoride (HF) is a colorless, highly corrosive gas with a sharp odor and systemic toxicity. See OSHA and NIOSH limits and HF monitors." url: https://aethair.io/parameters/hf/ --- Measurements · Gases & VOCs # Hydrogen Fluoride (HF) Hydrogen fluoride (HF), a highly toxic and corrosive gas from aluminum smelting, glass etching, and refining. [Schedule a call](https://calendly.com/d/ctdd-mkr-v9v/aethair-demo-website) [Configure Hydrogen Fluoride (HF) Monitoring](https://aethair.io/build/?params=hf) At a glance ppm Gases & VOCs 1 way to measure it - **Aethair PRO** 1 cartridge 5 standards set limits - [OSHA OSHA PEL](https://aethair.io/resources/osha-air-quality-standards-compliance/) - [AQMD SCAQMD 1180](https://aethair.io/standards/scaqmd_1180/) - [NIOSH NIOSH REL](https://aethair.io/standards/niosh_rel/) - [OSHA OSHA construction](https://aethair.io/standards/osha_construction_pel/) - [CAL Cal/OSHA PEL](https://aethair.io/standards/cal_osha_pel/) What it is ## What is hydrogen fluoride (HF)? Hydrogen fluoride is a colorless gas, or a fuming liquid just below room temperature, with a sharp, penetrating odor, and it is one of the most hazardous corrosive gases handled in industry. Dissolved in water it becomes hydrofluoric acid, which is uniquely dangerous because the fluoride ion penetrates tissue and disrupts the body far beyond any surface burn. Hydrogen fluoride is emitted by aluminum smelting (the dominant concern around smelters) and by glass and semiconductor etching, petroleum alkylation, phosphate fertilizer production, and the combustion of some fuels and minerals. Even as a vapor it is acutely toxic and corrosive. The reach of fluoride beyond the point of contact is what sets HF apart from ordinary acid gases and makes its monitoring a priority wherever it is used. ### Health and operational effects Hydrogen fluoride causes severe corrosive burns, but its greater danger is systemic: absorbed fluoride binds calcium in the body and can cause dangerously low blood calcium and cardiac effects even from a modest skin or inhalation exposure. Chronic low-level exposure leads to fluorosis, affecting bones and teeth. Around smelters, airborne fluoride damages vegetation and, through contaminated forage, livestock, so the environmental footprint extends well past the fence. This dual character, acute human toxicity and chronic environmental harm, shapes how it is monitored. For aluminum, semiconductor, refining, and fertilizer operations, hydrogen fluoride is at once an acute life-safety parameter and a fence-line environmental one. Limits ## Hydrogen Fluoride (HF) Limit Values The published values, by averaging period; each links to the standard that sets it. 8-hour TWA [**3 ppm** OSHA PEL](https://aethair.io/resources/osha-air-quality-standards-compliance/ "Table Z-2") [**3 ppm** OSHA construction](https://aethair.io/standards/osha_construction_pel/) 8-hour TWA (PEL) [**0.4 ppm** Cal/OSHA PEL](https://aethair.io/standards/cal_osha_pel/ "as F") 1-hour, notification threshold [**289 ppb** SCAQMD 1180](https://aethair.io/standards/scaqmd_1180/) TWA [**3 ppm** NIOSH REL](https://aethair.io/standards/niosh_rel/) Ceiling [**6 ppm** NIOSH REL](https://aethair.io/standards/niosh_rel/ "15-minute") STEL [**1 ppm** Cal/OSHA PEL](https://aethair.io/standards/cal_osha_pel/ "as F") - **OSHA PEL** 3 ppm: Table Z-2 - **Cal/OSHA PEL** 0.4 ppm: as F - **NIOSH REL** 6 ppm: 15-minute - **Cal/OSHA PEL** 1 ppm: as F Hydrogen fluoride is reported in ppm for workplace air and in µg/m³ for the lower ambient and fence-line levels. Occupational exposure is judged against limits such as the OSHA PEL and the [ACGIH TLV](https://aethair.io/standards/acgih_tlv/), which includes a ceiling value, while environmental fluoride around smelters is assessed against ambient and vegetation-protection limits; the applicable values appear in the limit table on this page. Because HF is acutely toxic, a short-term or ceiling value often governs, not just a shift average. How it is measured ## How Hydrogen Fluoride (HF) Is Measured **Electrochemical sensors** provide ppm-level detection and alarming around HF-handling processes and etch tools. For stack and [fence-line monitoring](https://aethair.io/solutions/perimeter-monitoring/), **tunable-laser and FTIR analyzers** measure HF continuously and specifically, and ion-selective electrodes or colorimetric methods on collected samples give time-averaged environmental figures. Like other acid gases HF is extremely reactive and adsorbs strongly onto surfaces, so heated, inert, and short sample paths are essential. Hydrogen fluoride is measured with the Aethair HF cartridge in Aethair PRO, or with an external professional analyzer connected through Thiamis. Aethair PRO cartridge 1 A pre-calibrated cartridge in one of Aethair PRO's sockets: Aethair HF. ### Placing hydrogen fluoride monitoring For worker protection, place detectors near HF sources (alkylation units, etch tools, smelter potlines, and acid-handling points) in the breathing zone. For environmental assessment, monitor at the stack and along the downwind fence-line with wind speed and direction, because smelter fluoride affects the surrounding land, crops, and grazing animals. As with all acid gases, keep sample lines short, heated, and inert so the reactive gas is not lost before it is measured. ### Every device and option that measures Hydrogen Fluoride (HF) 1 | Device / option | Type | Base platform | Measures | | - | - | - | - | | **Aethair HF** `0d85` | Gas sensor cartridge | Aethair PRO | Hydrogen Fluoride (HF) [Dew Point](https://aethair.io/parameters/dew_point/) [Heat Index](https://aethair.io/parameters/heat_index/) [Relative Humidity](https://aethair.io/parameters/humidity/) [Illuminance / Light](https://aethair.io/parameters/light/) [Particle Count (by size)](https://aethair.io/parameters/particle_count/) [PM1](https://aethair.io/parameters/pm1/) | [Configure Hydrogen Fluoride (HF) Monitoring](https://aethair.io/build/?params=hf) Where it is monitored ## Solutions That Monitor Hydrogen Fluoride (HF) Each one links to the solution page showing what that industry measures it for. ### [Occupational Safety & Industrial Hygiene](https://aethair.io/solutions/occupational-safety/) Often added Worker exposure, confined space, and heat stress ### [Oil & Gas / Petrochemical](https://aethair.io/solutions/oil-gas/) Often added Fence-line VOC, H₂S, and methane leak detection Article Library ## Reading on Hydrogen Fluoride (HF) ### [How to Choose an Air Quality Monitor: PRO, IAQ, or Thiamis](https://aethair.io/resources/choosing-aethair-monitoring-device/) Compare Aethair PRO, IAQ, and Thiamis to match the right device to your site, from commercial interiors to industrial and fenceline monitoring. ### [OSHA Air Quality Standards 2026: PELs & 29 CFR 1910.1000](https://aethair.io/resources/osha-air-quality-standards-compliance/) OSHA air quality standards for indoor and outdoor work: permissible exposure limits, Table Z-1, 29 CFR 1910.1000, and the heat and wildfire smoke triggers. [All articles](https://aethair.io/resources/) Related ## More in Gases & VOCs [Carbon Dioxide (CO₂)](https://aethair.io/parameters/co2/) [VOC (Total)](https://aethair.io/parameters/voc/) [Hydrogen Sulfide (H₂S)](https://aethair.io/parameters/h2s/) [Carbon Monoxide (CO)](https://aethair.io/parameters/co/) [Methane (CH₄)](https://aethair.io/parameters/ch4/) [Oxygen (O₂)](https://aethair.io/parameters/o2/) [Sulfur Dioxide (SO₂)](https://aethair.io/parameters/so2/) [Nitric Oxide (NO)](https://aethair.io/parameters/no/) [Nitrogen Dioxide (NO₂)](https://aethair.io/parameters/no2/) [Ammonia (NH₃)](https://aethair.io/parameters/nh3/) [Combustible (LEL)](https://aethair.io/parameters/lel/) [Chlorine (Cl₂)](https://aethair.io/parameters/cl2/) Questions ## Hydrogen Fluoride (HF) FAQ Why is hydrogen fluoride so dangerous compared with other acids? Most acids injure only the surface they touch, but hydrogen fluoride releases fluoride ions that penetrate tissue and act systemically, binding calcium in the body and causing effects on the heart even from a limited exposure. This means a burn that looks minor can be serious, and vapor exposure carries a toxicity beyond simple irritation. That is why HF is treated as exceptionally hazardous. Where is hydrogen fluoride encountered? The largest concern is aluminum smelting, which emits fluoride from the reduction process, along with glass and semiconductor etching, petroleum alkylation, and phosphate fertilizer production. Some fuels and minerals also release HF when burned. These industries monitor it for both worker safety and environmental emissions. Why is hydrogen fluoride monitored at the fence-line? Airborne fluoride from smelters settles on surrounding vegetation and, through contaminated forage, causes fluorosis in grazing livestock, so the impact extends well beyond the plant boundary. Fence-line and downwind monitoring, read with wind data, shows how much fluoride is reaching the surrounding land. It is an environmental-protection measurement as well as a safety one. How do I monitor hydrogen fluoride? Aethair PRO can measure hydrogen fluoride with an Aethair HF cartridge (an electrochemical sensor for area and safety monitoring), and for stack and fence-line work, Thiamis can connect a tunable-laser or FTIR analyzer with heated, inert sampling throughout. This suits aluminum, semiconductor, and refining operations. Use the configurator to combine HF with meteorological data and the other parameters your site needs.