---
title: "Trolex Sentro X Gas Detectors | Aethair"
description: "Trolex Sentro X fixed gas detector in the Aethair sensor catalog: hot-swappable gBloc sensors for 10 gases with STEL, TWA, and %LEL. Integration planned."
url: https://aethair.io/sensors/trolex-gas-detectors/
---

Sensors · Gas Detectors

# Trolex Sentro X

Gas Detectors

The Trolex Sentro X (TX6310) is a fixed gas-detection platform for mining and heavy industry. One controller takes a single hot-swappable, self-identifying gBloc sensor for CO, H₂, H₂S, NH₃, NO, NO₂, O₂, SO₂, CH₄, or CO₂, and reports live concentration plus STEL, TWA, and %LEL alarms over RS485 Modbus RTU, 4–20 mA, and 0.4–2 V.

[Schedule a call](https://calendly.com/d/ctdd-mkr-v9v/aethair-demo-website)

At a glance

**10** parameters **1** model

Planned The Trolex Sentro X integration is listed but not yet available to connect.

4 standards limit what it measures

- [Cal/OSHA PEL Cal/OSHA Permissible Exposure Limits (8 CCR §5155, Table AC-1)](https://aethair.io/standards/cal_osha_pel/)
- [NIOSH REL NIOSH Recommended Exposure Limits (RELs)](https://aethair.io/standards/niosh_rel/)
- [OSHA construction OSHA Construction Exposure Limits (29 CFR 1926.55)](https://aethair.io/standards/osha_construction_pel/)
- [OSHA PEL OSHA Permissible Exposure Limits (PEL)](https://aethair.io/resources/osha-air-quality-standards-compliance/)

Measures

## What the Trolex Sentro X Measures

10 parameters, each linked to its page: the sensors, units, and standards behind it.

[Carbon Monoxide (CO) ppm](https://aethair.io/parameters/co/) [Carbon Dioxide (CO₂) ppm](https://aethair.io/parameters/co2/) [Methane (CH₄) %LEL](https://aethair.io/parameters/ch4/) [Oxygen (O₂) %](https://aethair.io/parameters/o2/) [Hydrogen Sulfide (H₂S) ppm](https://aethair.io/parameters/h2s/) [Hydrogen (H₂) ppm](https://aethair.io/parameters/h2/) [Sulfur Dioxide (SO₂) ppm](https://aethair.io/parameters/so2/) [Nitric Oxide (NO) ppm](https://aethair.io/parameters/no/) [Nitrogen Dioxide (NO₂) ppm](https://aethair.io/parameters/no2/) [Ammonia (NH₃) ppm](https://aethair.io/parameters/nh3/)

Planned This integration is listed ahead of its release. It is not yet available through Thiamis, so it is not offered in the configurator.

Models

## Trolex Sentro X Models

1 model, with what it measures and the ranges from its datasheet.

| Model | Description | Measures & specs |
| - | - | - |
| **Sentro X (TX6310)** | Fixed gas-detection controller with a single hot-swappable, self-identifying gBloc sensor. Approved gBlocs cover CO, H₂, H₂S, NH₃, NO, NO₂, O₂, SO₂, CH₄, and CO₂, reporting live concentration plus STEL, TWA, and (for flammables) %LEL over RS485 Modbus RTU, with 4–20 mA and 0.4–2 V outputs. A Remote Sensor accepts any gBloc for placement in inaccessible locations. | [Carbon Monoxide (CO)](https://aethair.io/parameters/co/) [Carbon Dioxide (CO₂)](https://aethair.io/parameters/co2/) [Methane (CH₄)](https://aethair.io/parameters/ch4/) [Oxygen (O₂)](https://aethair.io/parameters/o2/) [Hydrogen Sulfide (H₂S)](https://aethair.io/parameters/h2s/) [Hydrogen (H₂)](https://aethair.io/parameters/h2/) [Sulfur Dioxide (SO₂)](https://aethair.io/parameters/so2/) [Nitric Oxide (NO)](https://aethair.io/parameters/no/) [Nitrogen Dioxide (NO₂)](https://aethair.io/parameters/no2/) [Ammonia (NH₃)](https://aethair.io/parameters/nh3/) |

Standards

## Standards for What It Measures

Standards that set limits on the parameters it reports.

[Cal/OSHA PEL Cal/OSHA Permissible Exposure Limits (8 CCR §5155, Table AC-1) 7 of its parameters](https://aethair.io/standards/cal_osha_pel/) [NIOSH REL NIOSH Recommended Exposure Limits (RELs) 7 of its parameters](https://aethair.io/standards/niosh_rel/) [OSHA construction OSHA Construction Exposure Limits (29 CFR 1926.55) 7 of its parameters](https://aethair.io/standards/osha_construction_pel/) [OSHA PEL OSHA Permissible Exposure Limits (PEL) 7 of its parameters](https://aethair.io/resources/osha-air-quality-standards-compliance/) [ACGIH TLV ACGIH Threshold Limit Values (TLV) 6 of its parameters](https://aethair.io/standards/acgih_tlv/) [OSHA confined space Confined-Space Atmospheric Limits 3 of its parameters](https://aethair.io/standards/confined_space/) [LEED v5 LEED v5: Indoor Air Quality Performance (Operations and Maintenance) 3 of its parameters](https://aethair.io/standards/leed_v5/) [SCAQMD 1180 SCAQMD Rule 1180: refinery fenceline and community air monitoring 3 of its parameters](https://aethair.io/standards/scaqmd_1180/) [EPA NAAQS US EPA National Ambient Air Quality Standards (NAAQS) 3 of its parameters](https://aethair.io/standards/epa_naaqs/) [WHO 2021 WHO Global Air Quality Guidelines 2021 3 of its parameters](https://aethair.io/standards/who_aqg_2021/) [EU 2024/2881 EU Ambient Air Quality Directive (EU) 2024/2881 2 of its parameters](https://aethair.io/standards/eu_aaqd_2024/) [WELL v2 WELL Building Standard v2: Air 2 of its parameters](https://aethair.io/resources/well-building-standard-air-quality/) [EPA 258.23 EPA Landfill Explosive Gases Control (40 CFR 258.23) 1 of its parameters](https://aethair.io/standards/epa_landfill_methane/) [UBA CO₂ Indoor CO₂ Guideline (German UBA / Pettenkofer scale) 1 of its parameters](https://aethair.io/standards/uba_indoor_co2/) [ISO 23875 ISO 23875: air quality control systems for operator enclosures 1 of its parameters](https://aethair.io/standards/iso_23875/) [RESET Air RESET Air: commercial interiors performance targets 1 of its parameters](https://aethair.io/standards/reset_air/)

Guidance that relies on it [BAAQMD Regulation 12, Rule 15: petroleum refining emissions tracking](https://aethair.io/standards/baaqmd_12_15/) [ANSI/ASHRAE Standard 62.1: ventilation for acceptable indoor air quality](https://aethair.io/standards/ashrae_62_1/)

Solutions

## Where the Trolex Sentro X Is Used

Solutions whose recommended configuration uses this instrument or whose standards it is built to, followed by solutions whose core panel it partly measures.

### [Occupational Safety & Industrial Hygiene](https://aethair.io/solutions/occupational-safety/)

Worker exposure, confined space, and heat stress

### [Landfill, Biogas & Odor](https://aethair.io/solutions/landfill-biogas/)

Methane, H₂S, and odor complaint response

### [Outdoor Monitoring](https://aethair.io/solutions/outdoor-monitoring/)

Continuous outdoor air quality networks that sit alongside reference monitors

### [Oil & Gas / Petrochemical](https://aethair.io/solutions/oil-gas/)

Fence-line VOC, H₂S, and methane leak detection

### [HVAC & Building Management](https://aethair.io/solutions/hvac-building/)

Monitor ventilation and filtration, with data for your BMS

On the platform

## What the Trolex Sentro X Gets From Aethair

Connected through Thiamis, its readings arrive in the same Environet account as Aethair's own monitors.

### [Live data and alerts](https://aethair.io/platform/environet/)

[Environet](https://aethair.io/platform/environet/) shows the instrument live and alerts the people you choose by email, SMS, and webhook, at the thresholds you set. [Noesis](https://aethair.io/platform/noesis/) sets up a dashboard, a report, or an alert from a plain-text request.

### [Compliance reports](https://aethair.io/platform/reports/)

[Aethair Reports](https://aethair.io/platform/reports/) produces scheduled or on-demand reports from the instrument's readings, as a PDF or secure link. Templates cover Aethair Blue, WELL v2, cabin air (ISO 23875), and the CMS-2567 healthcare codebook (ASHRAE 170), or you can report against custom limits such as OSHA PELs, NAAQS, EPA guidance, or your own program limits.

### [Dashboards and the app](https://aethair.io/platform/dashboards/)

Environet dashboards and the [Aethair App](https://aethair.io/platform/app/) show the instrument's readings just like any Aethair device. The occupant-facing [Aethair Dashboards](https://aethair.io/platform/dashboards/) status display is built around Aethair IAQ and Aethair PRO.

Similar

## Other Gas Detectors

### [RAE](https://aethair.io/sensors/rae-gas-detectors/)

[Gas Detectors](https://aethair.io/sensors/rae-gas-detectors/)

[RAE Systems (Honeywell) portable gas detectors. MultiRAE platforms are multi-gas monitors with 1 to…](https://aethair.io/sensors/rae-gas-detectors/)

### [RKI Instruments](https://aethair.io/sensors/rki-instruments-gas-detectors/)

[Gas Detectors](https://aethair.io/sensors/rki-instruments-gas-detectors/)

[The RKI Instruments GX-6000 is a handheld sample-draw gas monitor that measures up to six gases at…](https://aethair.io/sensors/rki-instruments-gas-detectors/)

### [TSI](https://aethair.io/sensors/tsi-gas-detectors/)

[Gas Detectors](https://aethair.io/sensors/tsi-gas-detectors/)

[TSI Gas Monitor GM460 handheld sample-draw multi-gas monitor, TSI's rebadge of the RKI Instruments…](https://aethair.io/sensors/tsi-gas-detectors/)

Article Library

## Reading on What These Instruments Measure

### [OSHA Air Quality Standards 2026: PELs & 29 CFR 1910.1000](https://aethair.io/resources/osha-air-quality-standards-compliance/)

OSHA air quality standards for indoor and outdoor work: permissible exposure limits, Table Z-1, 29 CFR 1910.1000, and the heat and wildfire smoke triggers.

[All articles](https://aethair.io/resources/)

Questions

## Trolex Sentro X FAQ

Which gases can the Sentro X detect?

The Sentro X takes one hot-swappable gBloc that self-identifies its gas type and range. Approved gBlocs cover carbon monoxide (CO, to 1000 ppm), hydrogen (H₂, to 1000 ppm), hydrogen sulfide (H₂S, to 50 ppm), ammonia (NH₃, to 500 ppm), nitric oxide (NO, to 50 ppm), nitrogen dioxide (NO₂, to 100 ppm), oxygen (O₂, to 25% v/v), sulfur dioxide (SO₂, to 20 ppm), methane (CH₄, 5% v/v pellistor or 100% v/v infrared), and carbon dioxide (CO₂, 100% v/v infrared). Each reports live concentration plus STEL, TWA, and, for flammables, %LEL.

How does the gBloc sensing module work?

A gBloc is an intrinsically safe, pre-calibrated gas-sensing module that plugs into the Sentro X controller or a remote sensor and can be hot-swapped with the power on. Each gBloc carries its own gas type, range, serial number, and default STEL/TWA setpoints, which the controller adopts automatically on insertion. When a gBloc for a different gas is inserted, the controller detects the change and reconfigures itself without recalibration.

Sources: [trolex.com](https://trolex.com/product/sentro-x/) · [trolex.com](https://trolex.com/product/gas-detection/)
