Sensors · Gas Detectors
Trolex Sentro X
Gas Detectors
The Trolex Sentro X (TX6310) is a fixed gas-detection platform for mining and heavy industry. One controller takes a single hot-swappable, self-identifying gBloc sensor for CO, H₂, H₂S, NH₃, NO, NO₂, O₂, SO₂, CH₄, or CO₂, and reports live concentration plus STEL, TWA, and %LEL alarms over RS485 Modbus RTU, 4–20 mA, and 0.4–2 V.
Measures
What the Trolex Sentro X Measures
10 parameters, each linked to its page: the sensors, units, and standards behind it.
PlannedThis integration is listed ahead of its release. It is not yet available through Thiamis, so it is not offered in the configurator.
Models
Trolex Sentro X Models
1 model, with what it measures and the ranges from its datasheet.
| Model | Description | Measures & specs |
|---|---|---|
Sentro X (TX6310) | Fixed gas-detection controller with a single hot-swappable, self-identifying gBloc sensor. Approved gBlocs cover CO, H₂, H₂S, NH₃, NO, NO₂, O₂, SO₂, CH₄, and CO₂, reporting live concentration plus STEL, TWA, and (for flammables) %LEL over RS485 Modbus RTU, with 4–20 mA and 0.4–2 V outputs. A Remote Sensor accepts any gBloc for placement in inaccessible locations. |
Standards
Standards for What It Measures
Standards that set limits on the parameters it reports.
Solutions
Where the Trolex Sentro X Is Used
Solutions whose recommended configuration uses this instrument or whose standards it is built to, followed by solutions whose core panel it partly measures.
Occupational Safety & Industrial Hygiene
Worker exposure, confined space, and heat stress
Landfill, Biogas & Odor
Methane, H₂S, and odor complaint response
Outdoor Monitoring
Continuous outdoor air quality networks that sit alongside reference monitors
Oil & Gas / Petrochemical
Fence-line VOC, H₂S, and methane leak detection
HVAC & Building Management
Monitor ventilation and filtration, with data for your BMS
On the platform
What the Trolex Sentro X Gets From Aethair
Connected through Thiamis, its readings arrive in the same Environet account as Aethair's own monitors.
Live data and alerts
Environet shows the instrument live and alerts the people you choose by email, SMS, and webhook, at the thresholds you set. Noesis sets up a dashboard, a report, or an alert from a plain-text request.
Compliance reports
Aethair Reports produces scheduled or on-demand reports from the instrument's readings, as a PDF or secure link. Templates cover Aethair Blue, WELL v2, cabin air (ISO 23875), and the CMS-2567 healthcare codebook (ASHRAE 170), or you can report against custom limits such as OSHA PELs, NAAQS, EPA guidance, or your own program limits.
Dashboards and the app
Environet dashboards and the Aethair App show the instrument's readings just like any Aethair device. The occupant-facing Aethair Dashboards status display is built around Aethair IAQ and Aethair PRO.
Similar
Other Gas Detectors
RAE
Gas Detectors
RAE Systems (Honeywell) portable gas detectors. MultiRAE platforms are multi-gas monitors with 1 to…
RKI Instruments
Gas Detectors
The RKI Instruments GX-6000 is a handheld sample-draw gas monitor that measures up to six gases at…
TSI
Gas Detectors
TSI Gas Monitor GM460 handheld sample-draw multi-gas monitor, TSI's rebadge of the RKI Instruments…
Article Library
Reading on What These Instruments Measure
OSHA Air Quality Standards 2026: PELs & 29 CFR 1910.1000
OSHA air quality standards for indoor and outdoor work: permissible exposure limits, Table Z-1, 29 CFR 1910.1000, and the heat and wildfire smoke triggers.
Questions
Trolex Sentro X FAQ
Which gases can the Sentro X detect?
The Sentro X takes one hot-swappable gBloc that self-identifies its gas type and range. Approved gBlocs cover carbon monoxide (CO, to 1000 ppm), hydrogen (H₂, to 1000 ppm), hydrogen sulfide (H₂S, to 50 ppm), ammonia (NH₃, to 500 ppm), nitric oxide (NO, to 50 ppm), nitrogen dioxide (NO₂, to 100 ppm), oxygen (O₂, to 25% v/v), sulfur dioxide (SO₂, to 20 ppm), methane (CH₄, 5% v/v pellistor or 100% v/v infrared), and carbon dioxide (CO₂, 100% v/v infrared). Each reports live concentration plus STEL, TWA, and, for flammables, %LEL.
How does the gBloc sensing module work?
A gBloc is an intrinsically safe, pre-calibrated gas-sensing module that plugs into the Sentro X controller or a remote sensor and can be hot-swapped with the power on. Each gBloc carries its own gas type, range, serial number, and default STEL/TWA setpoints, which the controller adopts automatically on insertion. When a gBloc for a different gas is inserted, the controller detects the change and reconfigures itself without recalibration.
Sources: trolex.com · trolex.com
Bring the Trolex Sentro X Into Environet
Schedule a callAll Trolex devices All sensors How Thiamis connects it
A 30-minute call: you tell us about your application, then we demo the solution for it.